Struct DataView

pub struct DataView { /* private fields */ }

Available on crate feature dep_js_sys only.

Implementations

impl DataView

pub fn new( buffer: &ArrayBuffer, byteOffset: usize, byteLength: usize, ) -> DataView

The DataView view provides a low-level interface for reading and writing multiple number types in an ArrayBuffer irrespective of the platform’s endianness.

MDN documentation

impl DataView

pub fn new_with_shared_array_buffer( buffer: &SharedArrayBuffer, byteOffset: usize, byteLength: usize, ) -> DataView

The DataView view provides a low-level interface for reading and writing multiple number types in an ArrayBuffer irrespective of the platform’s endianness.

MDN documentation

impl DataView

pub fn buffer(&self) -> ArrayBuffer

The ArrayBuffer referenced by this view. Fixed at construction time and thus read only.

MDN documentation

impl DataView

pub fn byte_length(&self) -> usize

The length (in bytes) of this view from the start of its ArrayBuffer. Fixed at construction time and thus read only.

MDN documentation

impl DataView

pub fn byte_offset(&self) -> usize

The offset (in bytes) of this view from the start of its ArrayBuffer. Fixed at construction time and thus read only.

MDN documentation

impl DataView

pub fn get_int8(&self, byte_offset: usize) -> i8

The getInt8() method gets a signed 8-bit integer (byte) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_uint8(&self, byte_offset: usize) -> u8

The getUint8() method gets a unsigned 8-bit integer (byte) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_int16(&self, byte_offset: usize) -> i16

The getInt16() method gets a signed 16-bit integer (short) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_int16_endian(&self, byte_offset: usize, little_endian: bool) -> i16

The getInt16() method gets a signed 16-bit integer (short) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_uint16(&self, byte_offset: usize) -> u16

The getUint16() method gets an unsigned 16-bit integer (unsigned short) at the specified byte offset from the start of the view.

MDN documentation

impl DataView

pub fn get_uint16_endian(&self, byte_offset: usize, little_endian: bool) -> u16

The getUint16() method gets an unsigned 16-bit integer (unsigned short) at the specified byte offset from the start of the view.

MDN documentation

impl DataView

pub fn get_int32(&self, byte_offset: usize) -> i32

The getInt32() method gets a signed 32-bit integer (long) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_int32_endian(&self, byte_offset: usize, little_endian: bool) -> i32

The getInt32() method gets a signed 32-bit integer (long) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_uint32(&self, byte_offset: usize) -> u32

The getUint32() method gets an unsigned 32-bit integer (unsigned long) at the specified byte offset from the start of the view.

MDN documentation

impl DataView

pub fn get_uint32_endian(&self, byte_offset: usize, little_endian: bool) -> u32

The getUint32() method gets an unsigned 32-bit integer (unsigned long) at the specified byte offset from the start of the view.

MDN documentation

impl DataView

pub fn get_float32(&self, byte_offset: usize) -> f32

The getFloat32() method gets a signed 32-bit float (float) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_float32_endian(&self, byte_offset: usize, little_endian: bool) -> f32

The getFloat32() method gets a signed 32-bit float (float) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_float64(&self, byte_offset: usize) -> f64

The getFloat64() method gets a signed 64-bit float (double) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn get_float64_endian(&self, byte_offset: usize, little_endian: bool) -> f64

The getFloat64() method gets a signed 64-bit float (double) at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_int8(&self, byte_offset: usize, value: i8)

The setInt8() method stores a signed 8-bit integer (byte) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_uint8(&self, byte_offset: usize, value: u8)

The setUint8() method stores an unsigned 8-bit integer (byte) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_int16(&self, byte_offset: usize, value: i16)

The setInt16() method stores a signed 16-bit integer (short) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_int16_endian( &self, byte_offset: usize, value: i16, little_endian: bool, )

The setInt16() method stores a signed 16-bit integer (short) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_uint16(&self, byte_offset: usize, value: u16)

The setUint16() method stores an unsigned 16-bit integer (unsigned short) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_uint16_endian( &self, byte_offset: usize, value: u16, little_endian: bool, )

The setUint16() method stores an unsigned 16-bit integer (unsigned short) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_int32(&self, byte_offset: usize, value: i32)

The setInt32() method stores a signed 32-bit integer (long) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_int32_endian( &self, byte_offset: usize, value: i32, little_endian: bool, )

The setInt32() method stores a signed 32-bit integer (long) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_uint32(&self, byte_offset: usize, value: u32)

The setUint32() method stores an unsigned 32-bit integer (unsigned long) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_uint32_endian( &self, byte_offset: usize, value: u32, little_endian: bool, )

The setUint32() method stores an unsigned 32-bit integer (unsigned long) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_float32(&self, byte_offset: usize, value: f32)

The setFloat32() method stores a signed 32-bit float (float) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_float32_endian( &self, byte_offset: usize, value: f32, little_endian: bool, )

The setFloat32() method stores a signed 32-bit float (float) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_float64(&self, byte_offset: usize, value: f64)

The setFloat64() method stores a signed 64-bit float (double) value at the specified byte offset from the start of the DataView.

MDN documentation

impl DataView

pub fn set_float64_endian( &self, byte_offset: usize, value: f64, little_endian: bool, )

The setFloat64() method stores a signed 64-bit float (double) value at the specified byte offset from the start of the DataView.

MDN documentation

Methods from Deref<Target = Object>

pub fn constructor(&self) -> Function

The constructor property returns a reference to the Object constructor function that created the instance object.

MDN documentation

pub fn has_own_property(&self, property: &JsValue) -> bool

The hasOwnProperty() method returns a boolean indicating whether the object has the specified property as its own property (as opposed to inheriting it).

MDN documentation

pub fn is_prototype_of(&self, value: &JsValue) -> bool

The isPrototypeOf() method checks if an object exists in another object’s prototype chain.

MDN documentation

pub fn property_is_enumerable(&self, property: &JsValue) -> bool

The propertyIsEnumerable() method returns a Boolean indicating whether the specified property is enumerable.

MDN documentation

pub fn to_locale_string(&self) -> JsString

The toLocaleString() method returns a string representing the object. This method is meant to be overridden by derived objects for locale-specific purposes.

MDN documentation

pub fn to_string(&self) -> JsString

The toString() method returns a string representing the object.

MDN documentation

pub fn value_of(&self) -> Object

The valueOf() method returns the primitive value of the specified object.

MDN documentation

Methods from Deref<Target = JsValue>

pub const NULL: JsValue

pub const UNDEFINED: JsValue

pub const TRUE: JsValue

pub const FALSE: JsValue

pub fn as_f64(&self) -> Option<f64>

Returns the f64 value of this JS value if it’s an instance of a number.

If this JS value is not an instance of a number then this returns None.

pub fn is_string(&self) -> bool

Tests whether this JS value is a JS string.

pub fn as_string(&self) -> Option<String>

If this JS value is a string value, this function copies the JS string value into Wasm linear memory, encoded as UTF-8, and returns it as a Rust String.

To avoid the copying and re-encoding, consider the JsString::try_from() function from js-sys instead.

If this JS value is not an instance of a string or if it’s not valid utf-8 then this returns None.

UTF-16 vs UTF-8

JavaScript strings in general are encoded as UTF-16, but Rust strings are encoded as UTF-8. This can cause the Rust string to look a bit different than the JS string sometimes. For more details see the documentation about the str type which contains a few caveats about the encodings.

pub fn as_bool(&self) -> Option<bool>

Returns the bool value of this JS value if it’s an instance of a boolean.

If this JS value is not an instance of a boolean then this returns None.

pub fn is_null(&self) -> bool

Tests whether this JS value is null

pub fn is_undefined(&self) -> bool

Tests whether this JS value is undefined

pub fn is_symbol(&self) -> bool

Tests whether the type of this JS value is symbol

pub fn is_object(&self) -> bool

Tests whether typeof self == "object" && self !== null.

pub fn is_array(&self) -> bool

Tests whether this JS value is an instance of Array.

pub fn is_function(&self) -> bool

Tests whether the type of this JS value is function.

pub fn is_bigint(&self) -> bool

Tests whether the type of this JS value is bigint.

pub fn js_typeof(&self) -> JsValue

Applies the unary typeof JS operator on a JsValue.

MDN documentation

pub fn js_in(&self, obj: &JsValue) -> bool

Applies the binary in JS operator on the two JsValues.

MDN documentation

pub fn is_truthy(&self) -> bool

Tests whether the value is “truthy”.

pub fn is_falsy(&self) -> bool

Tests whether the value is “falsy”.

pub fn loose_eq(&self, other: &JsValue) -> bool

Compare two JsValues for equality, using the == operator in JS.

MDN documentation

pub fn bit_not(&self) -> JsValue

Applies the unary ~ JS operator on a JsValue.

MDN documentation

pub fn unsigned_shr(&self, rhs: &JsValue) -> u32

Applies the binary >>> JS operator on the two JsValues.

MDN documentation

pub fn checked_div(&self, rhs: &JsValue) -> JsValue

Applies the binary / JS operator on two JsValues, catching and returning any RangeError thrown.

MDN documentation

pub fn pow(&self, rhs: &JsValue) -> JsValue

Applies the binary ** JS operator on the two JsValues.

MDN documentation

pub fn lt(&self, other: &JsValue) -> bool

Applies the binary < JS operator on the two JsValues.

MDN documentation

pub fn le(&self, other: &JsValue) -> bool

Applies the binary <= JS operator on the two JsValues.

MDN documentation

pub fn ge(&self, other: &JsValue) -> bool

Applies the binary >= JS operator on the two JsValues.

MDN documentation

pub fn gt(&self, other: &JsValue) -> bool

Applies the binary > JS operator on the two JsValues.

MDN documentation

pub fn unchecked_into_f64(&self) -> f64

Applies the unary + JS operator on a JsValue. Can throw.

MDN documentation

Trait Implementations

impl AsRef<DataView> for DataView

fn as_ref(&self) -> &DataView

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<JsValue> for DataView

fn as_ref(&self) -> &JsValue

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<Object> for DataView

fn as_ref(&self) -> &Object

Converts this type into a shared reference of the (usually inferred) input type.

impl Clone for DataView

fn clone(&self) -> DataView

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DataView

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for DataView

type Target = Object

The resulting type after dereferencing.

fn deref(&self) -> &Object

Dereferences the value.

impl From<DataView> for JsValue

fn from(obj: DataView) -> JsValue

Converts to this type from the input type.

impl From<DataView> for Object

fn from(obj: DataView) -> Object

Converts to this type from the input type.

impl From<JsValue> for DataView

fn from(obj: JsValue) -> DataView

Converts to this type from the input type.

impl FromWasmAbi for DataView

type Abi = <JsValue as FromWasmAbi>::Abi

The Wasm ABI type that this converts from when coming back out from the ABI boundary.

unsafe fn from_abi(js: <DataView as FromWasmAbi>::Abi) -> DataView

Recover a Self from Self::Abi.

impl<'a> IntoWasmAbi for &'a DataView

type Abi = <&'a JsValue as IntoWasmAbi>::Abi

The Wasm ABI type that this converts into when crossing the ABI boundary.

fn into_abi(self) -> <&'a DataView as IntoWasmAbi>::Abi

Convert self into Self::Abi so that it can be sent across the wasm ABI boundary.

impl IntoWasmAbi for DataView

type Abi = <JsValue as IntoWasmAbi>::Abi

The Wasm ABI type that this converts into when crossing the ABI boundary.

fn into_abi(self) -> <DataView as IntoWasmAbi>::Abi

Convert self into Self::Abi so that it can be sent across the wasm ABI boundary.

impl JsCast for DataView

fn instanceof(val: &JsValue) -> bool

Performs a dynamic instanceof check to see whether the JsValue provided is an instance of this type.

fn unchecked_from_js(val: JsValue) -> DataView

Performs a zero-cost unchecked conversion from a JsValue into an instance of Self

fn unchecked_from_js_ref(val: &JsValue) -> &DataView

Performs a zero-cost unchecked conversion from a &JsValue into an instance of &Self.

fn has_type<T>(&self) -> bool

where T: JsCast,

Test whether this JS value has a type T.

fn dyn_into<T>(self) -> Result<T, Self>

where T: JsCast,

Performs a dynamic cast (checked at runtime) of this value into the target type T.

fn dyn_ref<T>(&self) -> Option<&T>

where T: JsCast,

Performs a dynamic cast (checked at runtime) of this value into the target type T.

fn unchecked_into<T>(self) -> T

where T: JsCast,

Performs a zero-cost unchecked cast into the specified type.

fn unchecked_ref<T>(&self) -> &T

where T: JsCast,

Performs a zero-cost unchecked cast into a reference to the specified type.

fn is_instance_of<T>(&self) -> bool

where T: JsCast,

Test whether this JS value is an instance of the type T.

fn is_type_of(val: &JsValue) -> bool

Performs a dynamic check to see whether the JsValue provided is a value of this type.

impl LongRefFromWasmAbi for DataView

type Abi = <JsValue as LongRefFromWasmAbi>::Abi

Same as RefFromWasmAbi::Abi

type Anchor = DataView

Same as RefFromWasmAbi::Anchor

unsafe fn long_ref_from_abi( js: <DataView as LongRefFromWasmAbi>::Abi, ) -> <DataView as LongRefFromWasmAbi>::Anchor

Same as RefFromWasmAbi::ref_from_abi

impl OptionFromWasmAbi for DataView

fn is_none(abi: &<DataView as FromWasmAbi>::Abi) -> bool

Tests whether the argument is a “none” instance. If so it will be deserialized as None, and otherwise it will be passed to FromWasmAbi.

impl<'a> OptionIntoWasmAbi for &'a DataView

fn none() -> <&'a DataView as IntoWasmAbi>::Abi

Returns an ABI instance indicating “none”, which JS will interpret as the None branch of this option.

impl OptionIntoWasmAbi for DataView

fn none() -> <DataView as IntoWasmAbi>::Abi

Returns an ABI instance indicating “none”, which JS will interpret as the None branch of this option.

impl PartialEq for DataView

fn eq(&self, other: &DataView) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RefFromWasmAbi for DataView

type Abi = <JsValue as RefFromWasmAbi>::Abi

The Wasm ABI type references to Self are recovered from.

type Anchor = ManuallyDrop<DataView>

The type that holds the reference to Self for the duration of the invocation of the function that has an &Self parameter. This is required to ensure that the lifetimes don’t persist beyond one function call, and so that they remain anonymous.

unsafe fn ref_from_abi( js: <DataView as RefFromWasmAbi>::Abi, ) -> <DataView as RefFromWasmAbi>::Anchor

Recover a Self::Anchor from Self::Abi.

impl Eq for DataView

impl StructuralPartialEq for DataView