Struct RangeFull

pub struct RangeFull;

An unbounded range (..).

RangeFull is primarily used as a slicing index, its shorthand is ... It cannot serve as an Iterator because it doesn’t have a starting point.

Examples

The .. syntax is a RangeFull:

assert_eq!(.., std::ops::RangeFull);

It does not have an IntoIterator implementation, so you can’t use it in a for loop directly. This won’t compile:

for i in .. {
    // ...
}

Used as a slicing index, RangeFull produces the full array as a slice.

let arr = [0, 1, 2, 3, 4];
assert_eq!(arr[ ..  ], [0, 1, 2, 3, 4]); // This is the `RangeFull`
assert_eq!(arr[ .. 3], [0, 1, 2      ]);
assert_eq!(arr[ ..=3], [0, 1, 2, 3   ]);
assert_eq!(arr[1..  ], [   1, 2, 3, 4]);
assert_eq!(arr[1.. 3], [   1, 2      ]);
assert_eq!(arr[1..=3], [   1, 2, 3   ]);

Trait Implementations

impl Archive for RangeFull

const COPY_OPTIMIZATION: CopyOptimization<RangeFull>

An optimization flag that allows the bytes of this type to be copied directly to a writer instead of calling serialize.

type Archived = ArchivedRangeFull

The archived representation of this type.

type Resolver = ()

The resolver for this type. It must contain all the additional information from serializing needed to make the archived type from the normal type.

fn resolve( &self, _: <RangeFull as Archive>::Resolver, _: Place<<RangeFull as Archive>::Archived>, )

Creates the archived version of this value at the given position and writes it to the given output.

impl<C> CheckBytes<C> for RangeFull

where C: Fallible + ?Sized,

unsafe fn check_bytes( _: *const RangeFull, _: &mut C, ) -> Result<(), <C as Fallible>::Error>

Checks whether the given pointer points to a valid value within the given context.

impl Clone for RangeFull

fn clone(&self) -> RangeFull

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl ConstDefault for RangeFull

const DEFAULT: Self = Self

Returns the compile-time “default value” for a type.

impl<C1> ContainsToken<C1> for RangeFull

where C1: AsChar,

fn contains_token(&self, _token: C1) -> bool

Returns true if self contains the token

impl Debug for RangeFull

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for RangeFull

fn default() -> RangeFull

Returns the “default value” for a type.

impl<D> Deserialize<RangeFull, D> for ArchivedRangeFull

where D: Fallible + ?Sized,

fn deserialize(&self, _: &mut D) -> Result<RangeFull, <D as Fallible>::Error>

Deserializes using the given deserializer

impl<T> From<RangeFull> for Interval<T>

fn from(_: RangeFull) -> Self

Converts to this type from the input type.

impl From<RangeFull> for Range

fn from(_: RangeFull) -> Range

Converts to this type from the input type.

impl From<RangeFull> for Region

fn from(_: RangeFull) -> Region

Converts to this type from the input type.

impl Hash for RangeFull

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Index<RangeFull> for ArchivedCString

type Output = CStr

The returned type after indexing.

fn index(&self, _: RangeFull) -> &<ArchivedCString as Index<RangeFull>>::Output

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for ArchivedString

type Output = str

The returned type after indexing.

fn index( &self, index: RangeFull, ) -> &<ArchivedString as Index<RangeFull>>::Output

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for BStr

type Output = BStr

The returned type after indexing.

fn index(&self, _: RangeFull) -> &BStr

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for Bytes

type Output = Bytes

The returned type after indexing.

fn index(&self, _: RangeFull) -> &Bytes

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for CString

type Output = CStr

The returned type after indexing.

fn index(&self, _index: RangeFull) -> &CStr

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for OsString

type Output = OsStr

The returned type after indexing.

fn index(&self, _index: RangeFull) -> &OsStr

Performs the indexing (container[index]) operation.

impl<'bump> Index<RangeFull> for String<'bump>

type Output = str

The returned type after indexing.

fn index(&self, _index: RangeFull) -> &str

Performs the indexing (container[index]) operation.

impl Index<RangeFull> for UninitSlice

type Output = UninitSlice

The returned type after indexing.

fn index(&self, index: RangeFull) -> &UninitSlice

Performs the indexing (container[index]) operation.

impl IndexMut<RangeFull> for OsString

fn index_mut(&mut self, _index: RangeFull) -> &mut OsStr

Performs the mutable indexing (container[index]) operation.

impl<'bump> IndexMut<RangeFull> for String<'bump>

fn index_mut(&mut self, _index: RangeFull) -> &mut str

Performs the mutable indexing (container[index]) operation.

impl IndexMut<RangeFull> for UninitSlice

fn index_mut(&mut self, index: RangeFull) -> &mut UninitSlice

Performs the mutable indexing (container[index]) operation.

impl PartialEq<RangeFull> for ArchivedRangeFull

fn eq(&self, _: &RangeFull) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for RangeFull

fn eq(&self, other: &RangeFull) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> RangeBounds<T> for RangeFull

where T: ?Sized,

fn start_bound(&self) -> Bound<&T>

Start index bound.

fn end_bound(&self) -> Bound<&T>

End index bound.

fn contains<U>(&self, item: &U) -> bool

where T: PartialOrd<U>, U: PartialOrd<T> + ?Sized,

Returns true if item is contained in the range.

impl<S> Serialize<S> for RangeFull

where S: Fallible + ?Sized,

fn serialize( &self, _: &mut S, ) -> Result<<RangeFull as Archive>::Resolver, <S as Fallible>::Error>

Writes the dependencies for the object and returns a resolver that can create the archived type.

impl<T> SliceIndex<[T]> for RangeFull

type Output = [T]

The output type returned by methods.

fn get(self, slice: &[T]) -> Option<&[T]>

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a shared reference to the output at this location, if in bounds.

fn get_mut(self, slice: &mut [T]) -> Option<&mut [T]>

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable reference to the output at this location, if in bounds.

unsafe fn get_unchecked(self, slice: *const [T]) -> *const [T]

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a pointer to the output at this location, without performing any bounds checking.

unsafe fn get_unchecked_mut(self, slice: *mut [T]) -> *mut [T]

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable pointer to the output at this location, without performing any bounds checking.

fn index(self, slice: &[T]) -> &[T]

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a shared reference to the output at this location, panicking if out of bounds.

fn index_mut(self, slice: &mut [T]) -> &mut [T]

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable reference to the output at this location, panicking if out of bounds.

impl SliceIndex<str> for RangeFull

Implements substring slicing with syntax &self[..] or &mut self[..].

Returns a slice of the whole string, i.e., returns &self or &mut self. Equivalent to &self[0 .. len] or &mut self[0 .. len]. Unlike other indexing operations, this can never panic.

This operation is O(1).

Prior to 1.20.0, these indexing operations were still supported by direct implementation of Index and IndexMut.

Equivalent to &self[0 .. len] or &mut self[0 .. len].

type Output = str

The output type returned by methods.

fn get(self, slice: &str) -> Option<&<RangeFull as SliceIndex<str>>::Output>

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a shared reference to the output at this location, if in bounds.

fn get_mut( self, slice: &mut str, ) -> Option<&mut <RangeFull as SliceIndex<str>>::Output>

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable reference to the output at this location, if in bounds.

unsafe fn get_unchecked( self, slice: *const str, ) -> *const <RangeFull as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a pointer to the output at this location, without performing any bounds checking.

unsafe fn get_unchecked_mut( self, slice: *mut str, ) -> *mut <RangeFull as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable pointer to the output at this location, without performing any bounds checking.

fn index(self, slice: &str) -> &<RangeFull as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a shared reference to the output at this location, panicking if out of bounds.

fn index_mut( self, slice: &mut str, ) -> &mut <RangeFull as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (slice_index_methods)

Returns a mutable reference to the output at this location, panicking if out of bounds.

impl<T> TryFrom<Interval<T>> for RangeFull

Errors

Returns IncompatibleBounds if the bounds are not compatible.

type Error = NumError

The type returned in the event of a conversion error.

fn try_from(interval: Interval<T>) -> NumResult<Self>

Performs the conversion.

impl Copy for RangeFull

impl Eq for RangeFull

impl StructuralPartialEq for RangeFull