Struct i16x8
#[repr(C, align(16))]pub struct i16x8 { /* private fields */ }Available on crate feature
dep_wide only.Implementations§
§impl i16x8
impl i16x8
pub const fn new(array: [i16; 8]) -> i16x8
pub fn move_mask(self) -> i32
pub fn any(self) -> bool
pub fn all(self) -> bool
pub fn none(self) -> bool
pub fn from_u8x16_low(u: u8x16) -> i16x8
pub fn from_u8x16_low(u: u8x16) -> i16x8
Unpack the lower half of the input and expand it to i16 values.
pub fn from_u8x16_high(u: u8x16) -> i16x8
pub fn from_u8x16_high(u: u8x16) -> i16x8
Unpack the upper half of the input and expand it to i16 values.
pub fn from_i32x8_saturate(v: i32x8) -> i16x8
pub fn from_i32x8_saturate(v: i32x8) -> i16x8
returns low i16 of i32, saturating values that are too large
pub fn from_i32x8_truncate(v: i32x8) -> i16x8
pub fn from_i32x8_truncate(v: i32x8) -> i16x8
returns low i16 of i32, truncating the upper bits if they are set
pub fn from_slice_unaligned(input: &[i16]) -> i16x8
pub fn blend(self, t: i16x8, f: i16x8) -> i16x8
pub fn is_negative(self) -> i16x8
pub fn reduce_add(self) -> i16
pub fn reduce_add(self) -> i16
horizontal add of all the elements of the vector
pub fn reduce_min(self) -> i16
pub fn reduce_min(self) -> i16
horizontal min of all the elements of the vector
pub fn reduce_max(self) -> i16
pub fn reduce_max(self) -> i16
horizontal max of all the elements of the vector
pub fn abs(self) -> i16x8
pub fn unsigned_abs(self) -> u16x8
pub fn max(self, rhs: i16x8) -> i16x8
pub fn min(self, rhs: i16x8) -> i16x8
pub fn saturating_add(self, rhs: i16x8) -> i16x8
pub fn saturating_sub(self, rhs: i16x8) -> i16x8
pub fn dot(self, rhs: i16x8) -> i32x4
pub fn dot(self, rhs: i16x8) -> i32x4
Calculates partial dot product. Multiplies packed signed 16-bit integers, producing intermediate signed 32-bit integers. Horizontally add adjacent pairs of intermediate 32-bit integers.
pub fn mul_scale_round(self, rhs: i16x8) -> i16x8
pub fn mul_scale_round(self, rhs: i16x8) -> i16x8
Multiply and scale equivalent to ((self * rhs) + 0x4000) >> 15 on each
lane, effectively multiplying by a 16 bit fixed point number between -1
and 1. This corresponds to the following instructions:
vqrdmulhq_s16instruction on neoni16x8_q15mulr_saton simd128_mm_mulhrs_epi16on ssse3- emulated via
mul_i16_*on sse2
pub fn mul_keep_high(lhs: i16x8, rhs: i16x8) -> i16x8
pub fn mul_keep_high(lhs: i16x8, rhs: i16x8) -> i16x8
Multiples two i16x8 and return the high part of intermediate i32x8
pub fn mul_widen(self, rhs: i16x8) -> i32x8
pub fn mul_widen(self, rhs: i16x8) -> i32x8
multiplies two i16x8 and returns the result as a widened i32x8
pub fn mul_scale_round_n(self, rhs: i16) -> i16x8
pub fn mul_scale_round_n(self, rhs: i16) -> i16x8
Multiply and scale, equivalent to ((self * rhs) + 0x4000) >> 15 on each
lane, effectively multiplying by a 16 bit fixed point number between -1
and 1. This corresponds to the following instructions:
vqrdmulhq_n_s16instruction on neoni16x8_q15mulr_saton simd128_mm_mulhrs_epi16on ssse3- emulated via
mul_i16_*on sse2
pub fn to_array(self) -> [i16; 8]
pub fn as_array_ref(&self) -> &[i16; 8]
pub fn as_array_mut(&mut self) -> &mut [i16; 8]
Trait Implementations§
§impl AddAssign<&i16x8> for i16x8
impl AddAssign<&i16x8> for i16x8
§fn add_assign(&mut self, rhs: &i16x8)
fn add_assign(&mut self, rhs: &i16x8)
Performs the
+= operation. Read more§impl BitAndAssign<&i16x8> for i16x8
impl BitAndAssign<&i16x8> for i16x8
§fn bitand_assign(&mut self, rhs: &i16x8)
fn bitand_assign(&mut self, rhs: &i16x8)
Performs the
&= operation. Read more§impl BitAndAssign for i16x8
impl BitAndAssign for i16x8
§fn bitand_assign(&mut self, rhs: i16x8)
fn bitand_assign(&mut self, rhs: i16x8)
Performs the
&= operation. Read more§impl BitOrAssign<&i16x8> for i16x8
impl BitOrAssign<&i16x8> for i16x8
§fn bitor_assign(&mut self, rhs: &i16x8)
fn bitor_assign(&mut self, rhs: &i16x8)
Performs the
|= operation. Read more§impl BitOrAssign for i16x8
impl BitOrAssign for i16x8
§fn bitor_assign(&mut self, rhs: i16x8)
fn bitor_assign(&mut self, rhs: i16x8)
Performs the
|= operation. Read more§impl BitXorAssign<&i16x8> for i16x8
impl BitXorAssign<&i16x8> for i16x8
§fn bitxor_assign(&mut self, rhs: &i16x8)
fn bitxor_assign(&mut self, rhs: &i16x8)
Performs the
^= operation. Read more§impl BitXorAssign for i16x8
impl BitXorAssign for i16x8
§fn bitxor_assign(&mut self, rhs: i16x8)
fn bitxor_assign(&mut self, rhs: i16x8)
Performs the
^= operation. Read more§impl<'de> Deserialize<'de> for i16x8
impl<'de> Deserialize<'de> for i16x8
§fn deserialize<D>(
deserializer: D,
) -> Result<i16x8, <D as Deserializer<'de>>::Error> ⓘwhere
D: Deserializer<'de>,
fn deserialize<D>(
deserializer: D,
) -> Result<i16x8, <D as Deserializer<'de>>::Error> ⓘwhere
D: Deserializer<'de>,
Deserialize this value from the given Serde deserializer. Read more
§impl MulAssign<&i16x8> for i16x8
impl MulAssign<&i16x8> for i16x8
§fn mul_assign(&mut self, rhs: &i16x8)
fn mul_assign(&mut self, rhs: &i16x8)
Performs the
*= operation. Read more§impl Serialize for i16x8
impl Serialize for i16x8
§fn serialize<S>(
&self,
serializer: S,
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> ⓘwhere
S: Serializer,
fn serialize<S>(
&self,
serializer: S,
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> ⓘwhere
S: Serializer,
Serialize this value into the given Serde serializer. Read more
§impl SubAssign<&i16x8> for i16x8
impl SubAssign<&i16x8> for i16x8
§fn sub_assign(&mut self, rhs: &i16x8)
fn sub_assign(&mut self, rhs: &i16x8)
Performs the
-= operation. Read moreimpl Copy for i16x8
impl Eq for i16x8
impl Pod for i16x8
impl StructuralPartialEq for i16x8
Auto Trait Implementations§
impl Freeze for i16x8
impl RefUnwindSafe for i16x8
impl Send for i16x8
impl Sync for i16x8
impl Unpin for i16x8
impl UnwindSafe for i16x8
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T> ByteSized for T
impl<T> ByteSized for T
Source§const BYTE_ALIGN: usize = _
const BYTE_ALIGN: usize = _
The alignment of this type in bytes.
Source§fn byte_align(&self) -> usize
fn byte_align(&self) -> usize
Returns the alignment of this type in bytes.
Source§fn ptr_size_ratio(&self) -> [usize; 2]
fn ptr_size_ratio(&self) -> [usize; 2]
Source§impl<T, R> Chain<R> for Twhere
T: ?Sized,
impl<T, R> Chain<R> for Twhere
T: ?Sized,
§impl<T> CheckedBitPattern for Twhere
T: AnyBitPattern,
impl<T> CheckedBitPattern for Twhere
T: AnyBitPattern,
§type Bits = T
type Bits = T
Self must have the same layout as the specified Bits except for
the possible invalid bit patterns being checked during
is_valid_bit_pattern.§fn is_valid_bit_pattern(_bits: &T) -> bool
fn is_valid_bit_pattern(_bits: &T) -> bool
If this function returns true, then it must be valid to reinterpret
bits
as &Self.Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key and return true if they are equal.Source§impl<T> ExtAny for T
impl<T> ExtAny for T
Source§fn type_hash_with<H: Hasher>(&self, hasher: H) -> u64
fn type_hash_with<H: Hasher>(&self, hasher: H) -> u64
Returns a deterministic hash of the
TypeId of Self using a custom hasher.Source§fn as_any_mut(&mut self) -> &mut dyn Anywhere
Self: Sized,
fn as_any_mut(&mut self) -> &mut dyn Anywhere
Self: Sized,
Source§impl<T> ExtMem for Twhere
T: ?Sized,
impl<T> ExtMem for Twhere
T: ?Sized,
Source§const NEEDS_DROP: bool = _
const NEEDS_DROP: bool = _
Know whether dropping values of this type matters, in compile-time.
Source§fn mem_align_of<T>() -> usize
fn mem_align_of<T>() -> usize
Returns the minimum alignment of the type in bytes. Read more
Source§fn mem_align_of_val(&self) -> usize
fn mem_align_of_val(&self) -> usize
Returns the alignment of the pointed-to value in bytes. Read more
Source§fn mem_size_of<T>() -> usize
fn mem_size_of<T>() -> usize
Returns the size of a type in bytes. Read more
Source§fn mem_size_of_val(&self) -> usize
fn mem_size_of_val(&self) -> usize
Returns the size of the pointed-to value in bytes. Read more
Source§fn mem_needs_drop(&self) -> bool
fn mem_needs_drop(&self) -> bool
Returns
true if dropping values of this type matters. Read moreSource§fn mem_forget(self)where
Self: Sized,
fn mem_forget(self)where
Self: Sized,
Forgets about
self without running its destructor. Read moreSource§fn mem_replace(&mut self, other: Self) -> Selfwhere
Self: Sized,
fn mem_replace(&mut self, other: Self) -> Selfwhere
Self: Sized,
Source§unsafe fn mem_zeroed<T>() -> T
unsafe fn mem_zeroed<T>() -> T
Available on crate feature
unsafe_layout only.Returns the value of type
T represented by the all-zero byte-pattern. Read moreSource§unsafe fn mem_transmute_copy<Src, Dst>(src: &Src) -> Dst
unsafe fn mem_transmute_copy<Src, Dst>(src: &Src) -> Dst
Available on crate feature
unsafe_layout only.Returns the value of type
T represented by the all-zero byte-pattern. Read moreSource§fn mem_as_bytes(&self) -> &[u8] ⓘ
fn mem_as_bytes(&self) -> &[u8] ⓘ
Available on crate feature
unsafe_slice only.§impl<S> FromSample<S> for S
impl<S> FromSample<S> for S
fn from_sample_(s: S) -> S
Source§impl<T> Hook for T
impl<T> Hook for T
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more